BB "Standards": Square to Spline

Last post, we covered a little about evolution and the first branch of the BB Tree of Life: between cottered cranks and square taper cranks.  This post, we're going to dig a little deeper into the competitive pressures exerted on BB systems and talk about why ISIS (and others) are the next logical branch on the BB Tree of Life.  But first:

Evolution.  The gradual change in expressed genes due to the inherent advantage conferred by those traits over competing traits.  In the bike industry, it is the gradual change in the characteristics of technical systems due to advantages inherent in those systems as compared to other, competing systems.  In biology, competitive advantage is mind bogglingly broad.  It could be defined as faster, slower, shorter, stronger, lighter in color, etc.  It's not even worth trying to sort it out without context.

In the bike industry, it's a little easier.  I'd say the following are pretty generally accepted as competitive pressures:

• Weight
• "Stiffness" which is really a measure of efficiency
• Cost
• Aesthetics
• Aerodynamics
• Durability
• Other

If we want to oversimplify for the sake of making a point, you might say that, if all else is equal - if all of the above variables are exactly the same, except for one, the lighter/stiffer/cheaper/better looking/more aerodynamic/more durable component is going to be more successful.  Some time when we're out for a beer, we should discuss which of those is most important and/or which actually exerts the most pressure on the market performance of a component.  Of course, in the real world, all else is never equal, so shit gets confusing (which is where marketing steps in, but that's another conversation).

So at some point in the past, the limitations of the cottered crank became apparent, and gave rise to the square taper BB system.  The square taper BB was much better, but because competitive pressures are relative, it was only a matter of time before somebody developed something "better."  In the case of bicycles, the pattern is to address the weakest link first, making it better, which exposes the next weakest link.  Prior to the 80s, bikes were made of relatively narrow diameter steel tubing.  Even the nicest frames would be considered "flexy" by today's standards, so the stiffness of the BB system was not the weakest link in the chain of performance, and since they were durable and inexpensive, they didn't get a lot of attention.

With the rise of alternative frame materials and larger diameter tubes, frames stopped being the most flexible (i.e. least efficient) component of the bicycle and other components started getting scrutinized, and at some point, some rider or manufacturer realized his (because during the time period in question, you can be sure it was a him) square taper BB was too flexible.  A high school physics student knows that larger diameter tubes are stiffer, and since they are stiffer, can use less material, which if done properly, can actually make a stiffer component that is also lighter (a lesson Cannondale and Klein capitalized on with their oversized aluminum frames).

With frame stiffness increasing, all other components would be scrutinized, and the BB was a logical place to focus since it's amongst the first mechanisms transferring the force from the legs into forward motion.  How do you make it stiffer?  You take a cue from physics and use a spindle that's larger diameter.  The first to try this was Magic Motorcycle Components with their crankset that was later licensed by Cannondale under their CODA brand name. 

You want to talk about a design ahead of its time?  Look into these cranks.  I hesitate to bring them up because the design of these cranks jumps so many steps we need to examine.  But hey, they were the first to try a larger diameter crank spindle. 

In the interest of keeping these digestible, we'll leave it there for now.  Do some digging on Magic Motorcycle and be prepared to be amazed.  Next time we'll talk about Octalink and why Magic Motorcycle/CODA didn't succeed.

You're doin' it wrong

Going to pause the BB "Standard" Evolution/Bitching essays for a post about doing it wrong in all the right ways. 

A couple weeks ago, I was lucky enough to attend a party that started with a mountain bike ride.  I had to fly to get there, which meant I was going to borrow a bike because flying with a bike and/or shipping a bike in any way is way fucking expensive.  I don't really have any problems with borrowing bikes; in fact, I think it's a great way to experience bikes that I don't want or can't afford.  But there are certain parts of my personal bikes that really are personal - shoes/pedals and helmet.  But, these are heavy and take up a lot of space in a suitcase.  With airlines charging for any checked bags these days, that means if I fly, I'm usually not going to be bringing shoes and pedals.

So for this trip, I packed my "workout shoes" which is to say the shoes I wear when I want to look like I'm going to work out, am working out, or just finished working out.  They're sporty.  They're also of the new minimal school and are not far removed from being barefoot.  They're flexy.  I also packed one pair of bib shorts.

And that's it.  I had "prepared" for this ride by bringing shorts and barefoot running shoes.  You're doin' it wrong.

The bike I was borrowing was fuggin amazing.  Fully rigid single speed, ti, light, lively, awesome.  Not a bike I could ever afford, ever.  We screwed on some plastic platform pedals in the parking lot.  From this friend I also borrowed a helmet.  Found out later it belongs to his wife.  She's understanding.  Also on this ride was my brother, who I found out later had never ridden a bike off road before.  On top of that, his bike was purchased when he was graduating high school about 50 years ago.  It's a Raleigh M40 with the old Shimano cantilever brakes whose plastic spring carriers all broke.  It was completely bone stock down to the brake pads and Greenfield kickstand.  Oh, did I mention my brother and I are both 6'2" tall?  It's a 16 or 17 inch frame.

So there it is; no gloves, no clipless, no water, no food.  Just me, a chamois, a bike, and a brother even more poorly equipped than me.  Read the mags.  Take your pick of any of the trash out there and they'll say you're doing it wrong. 

Know what?  IT WAS FUCKING AWESOME.  I'm not saying all the shit that goes with riding can't be fun, or that it doesn't affect the ride experience for the better.  But it just doesn't matter in the end.  Even when I swapped bikes with my brother and found myself on that shitty, tiny, heavy bike, it didn't matter.  I was still having a blast. 

So just ride your fucking bike.  Feel like it's too smallheavyshittyuglycheap?  Try riding it.  While you're riding, STOP THINKING ABOUT THE BIKE.  Look around.  Smile at the people you see.  Stop to appreciate the skylinehorizonmountainsflowershotchicks.  True story - if you're appreciating the experience, the bike and all the shit that go with it just become tiny, insignificant details.

Just ride your fucking bike!